Vendor productsProducts found: 5322

AL-KO drawbar support, 150 mm high, hole spacing 130/166 mm, bores Ø 12.5 mm, galvanised steel

CODE:

2772

Availability: 7 item(s)

This product cannot be added to the
cart because you are not logged in.

Bolted to the drawbar and serves as a support; fixed via Ø 12.5 mm bores, galvanised steel.

Brand

AL-KO

Hole(s) (mm)

12.5

Gas spring 14/28, 2250 N, 570 mm, 220 mm stroke

CODE:

20457

Availability: 11 item(s)

This product cannot be added to the
cart because you are not logged in.

Gas spring for lifting and holding open heavy flaps and hoods on trailer bodies; compare force, length and stroke with the old part before replacing. Cross-reference nos.: 281987, 1003563; Dealer part no.: 10027642

End fittings

Eye/eye

Extension force (N)

2250

Gas spring 14/28, 2500 N, 570 mm, 220 mm stroke

CODE:

20458

Availability: 30 item(s)

This product cannot be added to the
cart because you are not logged in.

Gas spring for lifting and holding open lids or flaps, weight 0.858 kg; also available in the same dimensions with 500 and 750 N. Cross-reference nos.: 282425, 1013346; Dealer part no.: 10027643

End fittings

Eye/eye

Extension force (N)

2500

Type plate, 58 x 150 x 0.5 mm, bores Ø 3.6 mm

CODE:

400500

Availability: 145 item(s)

This product cannot be added to the
cart because you are not logged in.

Plate for permanent marking of trailers, chassis and frame parts with technical and identification data; fully anodised aluminium.

NIEPER LSTO ring, Ø 25/47 x 4 mm

CODE:

98021000

Availability: 5 item(s)

This product cannot be added to the
cart because you are not logged in.

Seals off the hub cavity on NIEPER axles with 25 mm bearing seat; the 4 mm thick washer sits in a 47 mm bore. Dealer part no.: 780025

NIEPER shaft seal, Ø 48/72 x 7 mm

CODE:

98022200

Availability: 39 item(s)

This product cannot be added to the
cart because you are not logged in.

Shaft seal from NIEPER with 48 mm shaft seat in 72 mm hub bore, 7 mm wide. Dealer part no.: 780039

AL-KO drawbar, for BPW ZAF 2,8-2/3,0-3 ZAAQ 3,0-3, Ø 50 x 429 mm, ETI 827004/827009

CODE:

630660

Availability: 2 item(s)

This product cannot be added to the
cart because you are not logged in.

AL-KO drawbar with 50 mm diameter and 429 mm length for the overrun couplings ZAF 2,8-2, ZAF 3,0-3 and ZAAQ 3,0-3. Manufacturer part no.: 4018104; Dealer part no.: 807256

Adjusting bolt for S3006-7

CODE:

63022

Availability: 4 item(s)

This product cannot be added to the
cart because you are not logged in.

Adjusting bolt for the wheel brake S 3006-7, 0.01 kg. Cross-reference nos.: 4016494, 03.276.13.02.0; Dealer part no.: 840310

CHAPEL seal kit JP25SDA, for hand pump P25SDA1

CODE:

JP25SDA

Out of stock. If required, please enquire at mail@trailer.one.

Seal kit JP25SDA from CHAPEL, intended for the P25SDA1 hand pump. Dealer part no.: 10027257

CHAPEL counterbalance valve BL38SCB60-350EAT, in block, single

CODE:

BL38SCB60-350EAT

Out of stock. If required, please enquire at mail@trailer.one.

Counterbalance valve in EAT version, single, 350 bar, pilot ratio 2.5:1, 3/8 inch.

ASPÖCK Flexipoint I outline marker lamp red/white, right, with bracket 115 mm, 115 x 50 x 35 mm, 500 mm DC flat cable

CODE:

105282

Availability: 6 item(s)

This product cannot be added to the
cart because you are not logged in.

Right-hand version for marking the vehicle width: white light to the front, red light to the rear; for vertical mounting, DC flat cable for connection already fitted.

Brand

ASPÖCK

Installation position

Universal