Home/All vendors/Helmut Bünte GmbH/Plugs, adapters and wiring/Control units

Control unitsProducts found: 4

LED resistor adapter, 13-/8-pin (socket 13 pins wired, plug 8 pins wired)

CODE:

303542

Availability: 60 item(s)

This product cannot be added to the
cart because you are not logged in.

Adapter with built-in load resistors: 13-pin socket to 8-pin plug, so that LED lights are recognised by the failure monitoring.

Brand

Own brand

LED

LUCIDITY 68007 plug-in LED Smart Load, 12 V with 13-pin plug/socket, 1.65 m cable

CODE:

64110

Availability: 3 item(s)

This product cannot be added to the
cart because you are not logged in.

Fitted between the vehicle socket and the trailer plug and increases the current draw of LED lights for the failure monitoring; on 7-pin systems an additional converter is required.

Brand

LUCIDITY

EAN

4054354090664

ASPÖCK control gear LCG 1 channel, right

CODE:

10967

Availability: 34 item(s)

This product cannot be added to the
cart because you are not logged in.

ASPÖCK LCG ballast unit with 1 channel for the right-hand side. Manufacturer part no.: 75-0317-007; Cross-reference no.: 417235.001; Dealer part no.: 11002915

247 LIGHTING resistor, 12/24 V, 50 W, 6 Ohm, 55 x 40 x 18 mm, 2-pin with flat connector

CODE:

101950

Availability: 10 item(s)

This product cannot be added to the
cart because you are not logged in.

Load resistor for vehicle electrics, e.g. to compensate for the lower load when converting to LED lights; connected via two blade connectors.

Number of poles

Ask a question

Vendor filters