Vendor productsProducts found: 5322

Hex nut, M10 x 8 mm, across flats 17

CODE:

40601

Availability: 100 item(s)

This product cannot be added to the
cart because you are not logged in.

Standard nut with coarse thread for bolted joints on chassis and body, low overall height of 8 mm.

Spanner size

Thread

M10

Brake cable holder, bolt-on

CODE:

60030

Availability: 2 item(s)

This product cannot be added to the
cart because you are not logged in.

Holds and guides a brake cable on the trailer chassis; the bracket is bolted on.

BPW support bracket, 200 x 30 x 120 mm, hole spacing 135/166 mm

CODE:

4014887

Out of stock. If required, please enquire at mail@trailer.one.

Support bracket for BPW bolt patterns with 135 and 166 mm hole spacing, 200 mm long and 120 mm high. Cross-reference no.: 02.3708.23.00

CHAPEL weld-on ring JRPK, Ø 86/96 mm, for steel tank

CODE:

JRPK

Out of stock. If required, please enquire at mail@trailer.one.

Weld-on ring from CHAPEL with 86 mm inside and 96 mm outside diameter, which is welded into a steel tank.

CHAPEL telescopic cylinder 201 R, single-acting, 2-stage, 595 mm stroke, with weldable ball socket

CODE:

201 R

Out of stock. If required, please enquire at mail@trailer.one.

Two-stage tipper cylinder with 595 mm stroke and weld-on ball socket for 55 mm ball, designed for up to 14 t.

Brand

CHAPEL

Stroke (mm)

595

CHAPEL telescopic cylinder 203, single-acting, 2-stage, 950 mm stroke

CODE:

203

Out of stock. If required, please enquire at mail@trailer.one.

950 mm stroke from two stages of 68 and 88 mm, single-acting, with 36 mm head mount instead of a ball socket.

Brand

CHAPEL

Stroke (mm)

950

Fabric cover net, 2.5 x 4.5 m, with elastic cord

CODE:

63525

Availability: 87 item(s)

This product cannot be added to the
cart because you are not logged in.

For covering open trailers, skips or containers to prevent loss of load during transport; fine-mesh fabric, fastened with the elastic rope supplied. Dealer part nos.: 9954525, 11003034

Length (mm)

4500

Width (mm)

2500

AL-KO coupling head AK 7-D, up to 750 kg, square 50 mm, hole spacing horizontal/vertical 90 mm, nose weight 75 kg

CODE:

420640

Availability: 2 item(s)

This product cannot be added to the
cart because you are not logged in.

For unbraked trailers with square drawbar; fixed via Ø 10.5 mm bores with horizontal and vertical hole spacing.

Brand

AL-KO

Hole spacing (mm)

Brake shoe set complete, 160 x 35 mm, for RB KNOTT 16-1365, with springs, expander locks, adjusting parts

CODE:

901697

Availability: 5 item(s)

This product cannot be added to the
cart because you are not logged in.

For complete overhaul of the KNOTT 16-1365 wheel brake, additionally with adjuster bolts, adjuster wedges, hex bolts and flange nuts.

Brand

Aftermarket product

Length (mm)

160

Gas spring 14/28, 2500 N, 700 mm, 300 mm stroke

CODE:

20468

Availability: 7 item(s)

This product cannot be added to the
cart because you are not logged in.

Gas spring for heavy lids and flaps on trailer bodies; same length and stroke also available with 500 and 750 N, weight 1.2 kg. Dealer part no.: 11002941

End fittings

Eye/eye

Extension force (N)

2500

KNOTT brake cable, length sleeve/total 500/760 mm, cable nipple/M10, outer bell Ø 30 mm/M16 x 1,5 mm

CODE:

33983-1.01

Availability: 2 item(s)

This product cannot be added to the
cart because you are not logged in.

Short cable from the 30 mm series: 500 mm sheath, 760 mm overall length, bell Ø 30 mm and M16 x 1.5 on the sheath, M10 on the cable. Dealer part no.: 640500

NIEPER LSTO ring, Ø 35/62 x 4 mm

CODE:

98021300

Availability: 4 item(s)

This product cannot be added to the
cart because you are not logged in.

For hubs with 35 mm bearing seat and 62 mm mount; as a 72 mm variant with the same bore is also stocked, the hub diameter determines the choice. Dealer part no.: 780029

Show other 12 products

354 - 368 Prev

362 363 364 365 366 367 368 369 370 371 372 373 374 375 376

Next 370 - 384