Vendor productsProducts found: 5322

CODE:

98021300

Availability: 4 item(s)

This product cannot be added to the
cart because you are not logged in.

For hubs with 35 mm bearing seat and 62 mm mount; as a 72 mm variant with the same bore is also stocked, the hub diameter determines the choice. Dealer part no.: 780029

AL-KO drawbar 161/251 S DIN towing eye

CODE:

65762

Availability: 1 item(s)

This product cannot be added to the
cart because you are not logged in.

AL-KO drawbar for the overrun couplings 161 S and 251 S, fitted with a DIN-standard towing eye, installation length 445 mm. Manufacturer part no.: 571875; Dealer part nos.: 10019827, 519318

Drawbar connection profile 60x60, AL-KO

CODE:

65114

Availability: 1 item(s)

This product cannot be added to the
cart because you are not logged in.

Drawbar connection profile with 60 x 60 mm square section, to fit AL-KO chassis. Weight 2.5 kg. Cross-reference no.: 247853; Dealer part no.: 510621

Brand

Aftermarket product

CHAPEL seal kit JP20SDA, for hand pump P20SDA1

CODE:

JP20SDA

Out of stock. If required, please enquire at mail@trailer.one.

Seal kit JP20SDA, fits only the CHAPEL P20SDA1 hand pump.

CHAPEL swivel fitting RAC.T, Ø 17 mm, 1/2 inch

CODE:

RAC.T

Out of stock. If required, please enquire at mail@trailer.one.

Swivel fitting RAC.T from CHAPEL in size Ø 17 mm at A, Ø 11 mm at B, 1/2 inch thread.

Brand

CHAPEL

Diameter (mm)

CHAPEL counterbalance valve BL38SDCB60-350EAT, in block, double

CODE:

BL38SDCB60-350EAT

Out of stock. If required, please enquire at mail@trailer.one.

Dual counterbalance valve -350EAT, 3/8 inch, up to 350 bar, 60 l/min, pilot ratio 2.5:1.

Corner steady, universal, 280 x 535 x 90 mm, extension length 450 mm, support load 500 kg, 19 mm hexagon, hot-dip galvanised

CODE:

2720

Availability: 7 item(s)

This product cannot be added to the
cart because you are not logged in.

For supporting trailers and bodies; operated via 19 mm hex with hand crank, 19 mm across flats, hole spacing max. 215/490 mm.

Brand

Own brand

Extension length (mm)

450

T-head bolt, M8 x 25 mm, head 23 x 8.5 mm, stainless steel

CODE:

2732

Availability: 84 item(s)

This product cannot be added to the
cart because you are not logged in.

Stainless steel T-head bolt with M8 thread for bolted joints in slot and rail profiles.

Brand

Own brand

Material

Stainless steel

KNOTT brake drum, Ø 200 x 50 mm, for wheel brake 20-2425/1, 20-2426/1, PCD 112/5, compact bearing Ø 34/64 x 37 mm

CODE:

60100

Availability: 16 item(s)

This product cannot be added to the
cart because you are not logged in.

Replacement for worn brake drums on KNOTT 20-2425/1 and 20-2426/1 wheel brakes; mounted on compact bearings, not taper roller bearings.

Brand

KNOTT

Compact bearing

Gas spring 14/28, 2000 N, 570 mm, 220 mm stroke

CODE:

20456

Availability: 19 item(s)

This product cannot be added to the
cart because you are not logged in.

Gas spring for lifting and holding open flaps and lids on trailer bodies; connection via eyes with Ø 8.1 mm bore. The 615 mm spring with the same force and stroke is 45 mm longer. Cross-reference nos.: 281986, 1000865; Dealer part no.: 10027641

Diameter (mm)

14/28

End fittings

Eye/eye

Lashing recess, round, Ø 75 x 16 mm, with 360° swivelling ring, 500 daN, galvanised steel

CODE:

40272

Availability: 20 item(s)

This product cannot be added to the
cart because you are not logged in.

Recessed lashing point for load securing in the floor of trailers and vans; hook or ring rotates through 360°, lashing capacity 500 daN.

DE HAAN HMK 2066 single-axle mudguard

CODE:

20144

Out of stock. If required, please enquire at mail@trailer.one.

DE HAAN mudguard of the HMK series in size 2066, for single-axle trailers. Cross-reference no.: 404451.001

Show other 12 products

355 - 369 Prev

363 364 365 366 367 368 369 370 371 372 373 374 375 376 377

Next 371 - 385