Components for special trailersProducts found: 145

Breast bar end piece, Ø 43/53 mm, with screw-on pin, galvanised cast iron

CODE:

403030

Availability: 27 item(s)

This product cannot be added to the
cart because you are not logged in.

End fitting for breast bars with Ø 43 or 53 mm, mounted via the screwed-in pin; galvanised cast iron. Cross-reference nos.: 417081001, 1000569442; Dealer part nos.: 4046001, 610160, 10034427

Material

Galvanised cast iron

Breast bar end piece, Ø 43/53 mm, with screw-on round hook, galvanised cast iron

CODE:

402640

Availability: 51 item(s)

This product cannot be added to the
cart because you are not logged in.

End fitting for breast bars with Ø 43 or 53 mm; the screwed-in round hook is used to hang the bar, galvanised cast iron. Cross-reference no.: 417083001; Dealer part nos.: 610162, 10034428

Material

Galvanised cast iron

Partition holder, 190 mm, 3-hole, for hook galvanised cast iron

CODE:

40308

Availability: 33 item(s)

This product cannot be added to the
cart because you are not logged in.

Takes the hook of a partition and is bolted on via three bores. Cross-reference nos.: 1000569434, 12076; Dealer part nos.: 076683, 10034415

Length (mm)

190

Material

Galvanised cast iron

Tongue latch, 28 x 125 mm, hole spacing 100 mm bores Ø 5.5 mm, square 8 mm, galvanised steel

CODE:

40268

Availability: 2088 item(s)

This product cannot be added to the
cart because you are not logged in.

Fastener for doors, gates, flaps and similar structures, operated via an 8 mm square pin. Cross-reference no.: 408057001; Dealer part nos.: 10029141, 601272, 11004905

Hole spacing (mm)

100

Hole(s) (mm)

External lock, 70 x 100 mm, with 2 keys for door lock 40305/403050

CODE:

40306

Availability: 5 item(s)

This product cannot be added to the
cart because you are not logged in.

Lockable aluminium outer part, matching door locks 40305 and 403050; two keys included. Dealer part no.: 700418

Length (mm)

100

Material

Aluminium

Side wall bracket, 33 x 220 x 24 mm, 3-hole for pin, galvanised cast iron

CODE:

403070

Availability: 2 item(s)

This product cannot be added to the
cart because you are not logged in.

Fitting for mounting on the side wall with three locating holes for pins; galvanised cast iron. Cross-reference nos.: 417086001, 1000569447; Dealer part nos.: 4046008, 763106, 10034425

Length (mm)

220

Material

Galvanised cast iron

Boat support pad, 198 x 300 x 39 mm, with wooden insert 2 tee nuts M10, polyurethane

CODE:

30065

Availability: 4 item(s)

This product cannot be added to the
cart because you are not logged in.

Hull support for boat trailers and launching trolleys; the wooden insert gives the polyurethane pad dimensional stability, bolted to the trailer via the fitted M10 T-nuts. Dealer part no.: 622012

Length (mm)

300

Material

Polyurethane

Twist lock, 15 x 66 x 15 mm, hole spacing 51 mm for oval eyelet 22 x 42 mm, galvanised steel

CODE:

20228

Availability: 3127 item(s)

This product cannot be added to the
cart because you are not logged in.

Turn button fastener for covers and tarpaulins that engages through the 22 x 42 mm oval eyelet. Cross-reference nos.: 403209.001, 03.0242.01; Dealer part nos.: 506090, 761956, 10018381

Hole spacing (mm)

Length (mm)

Bow, adjustable 1000-1450 mm, for flat covers with plastic angle piece, L-profile, aluminium

CODE:

20821

Availability: 259 item(s)

This product cannot be added to the
cart because you are not logged in.

Cover bow for car trailers with flat cover: raises the cover in the middle so that rain and snow run off. Rests on the side board via an L-profile; one bow per metre of load length is recommended. Cross-reference no.: 418541001; Dealer part nos.: 621041, 10034227

Adjustable

Material

Aluminium

Strap staple, 15 x 66 mm, hole spacing 51 mm, clear height 16 mm, clear width 26 mm, galvanised

CODE:

202250

Availability: 78 item(s)

This product cannot be added to the
cart because you are not logged in.

For passing through and fastening straps, belts or ropes on bodies and tarpaulins; screwed on via two bores. Dealer part no.: 765358

Hole spacing (mm)

Length (mm)

Hasp staple, 20 x 72 mm, hole spacing 51 mm, clear height 30 mm, clear width 21 mm, galvanised

CODE:

20223

Availability: 165 item(s)

This product cannot be added to the
cart because you are not logged in.

Bolt-on bracket used as a guide or holder for tubes, rods or strips; clear internal dimension 21 x 30 mm, hole spacing 51 mm. Dealer part no.: 761972

Clear height (mm)

Clear width (mm)

Door holder, complete, with hook part, holding part 2 protective surrounds

CODE:

60011

Availability: 161 item(s)

This product cannot be added to the
cart because you are not logged in.

Complete door retainer with hook part, holding part and two protective surrounds for secure and gentle door fixing. Cross-reference no.: 408945001; Dealer part nos.: 11008168, 601277

Brand

Aftermarket product

EAN

4054354053003

Show other 12 products

1 2 3 4 5 6 7 8

Next 2 - 13

Trailer Body Components, Covers & Panels

Expand your loading capacity: Discover premium aluminium drop side profiles, robust cover frames, tarpaulins, and gas struts for trailers up to 3.5t.

The body structure defines the versatility of your trailer. Whether you need to replace damaged panels, install a high cover framework, or secure bulk material with drop side extensions – the right body components adapt your trailer to any transport task. At BÜNTE, you will find durable parts for repairs, upgrades, and custom builds.

Drop Side Profiles and Corner Posts

A sturdy superstructure requires perfectly matching profiles and pillars. Our product range includes:

Aluminium Drop Side Profiles: Lightweight, extremely robust, and corrosion-resistant. Ideal for modern trailer construction and straightforward repairs.
Corner & Centre Pillars: The load-bearing pillars of your trailer body. Available as fixed or removable variants for maximum flexibility when loading.
Drop Side Extensions: Perfect for doubling your loading volume for leaves, firewood, or green waste in an instant.

Cover Frames (Spriegel) and Heavy-Duty Tarpaulins

Protect your cargo from wind, rain, and theft. We supply pre-assembled cover frames made of galvanized steel, featuring low self-weight combined with high torsional stiffness. Our matching flat and high tarpaulins are manufactured from tear-resistant, truck-grade PVC material, optimized for year-round outdoor usage.

Gas Struts and Hardware for Covered Trailers

Lifting heavy trailer lids or tailgates becomes effortless with properly rated gas struts. We stock gas pressure springs in various lengths and extension forces (Newton). For small components, eyelets, hooks, and fittings, trust our "Trusted Aftermarket Product" seal to get certified road quality at a fair price.