Vendor productsProducts found: 5322

PRESKO Trailer Winch T-REX 3.5, 12 V, 1.590 kg pulling force, steel cable 5,5 mm x 12 m

CODE:

280003

Availability: 73 item(s)

This product cannot be added to the
cart because you are not logged in.

Robust 12 V trailer winch with reserve power for car trailers, boat trailers, flatbed trailers and car transporters. Reliably pulls even small cars, boats, quads or heavier loads onto the loading area. The compact, rugged housing is built for permanent outdoor use on the trailer. With wired and wireless remote control – an affordable solution for anyone who loads regularly. Scope of delivery: wired IN/OUT control, wireless remote control, control box with relay and cables, mounting plate, roller fairlead, hook with red safety strap, bolts and protective caps.

Brand

PRESKO

PRESKO Trailer Winch T-REX 3.0 S, 12 V, 1.360 kg pulling force, synthetic rope 5 mm x 11 m

CODE:

280002

Availability: 24 item(s)

This product cannot be added to the
cart because you are not logged in.

Robust 12 V trailer winch for car trailers, boat trailers and small car transporters. Reliably pulls boats, quads, ride-on mowers or loads onto the loading area. The synthetic rope does not rust, is lighter than steel cable and gentle on the load. The compact, rugged housing is built for permanent outdoor use on the trailer. With wired and wireless remote control – an affordable solution for anyone who loads regularly. Scope of delivery: wired IN/OUT control, wireless remote control, control box with relay, mounting plate, hawse fairlead, hook with safety strap, bolts and protective caps.

Brand

PRESKO

Gasfeder GF8/19, 471 mm, 190 mm Hub, 150 N – passend für Case IH

CODE:

277217

This product cannot be added to the
cart because you are not logged in.

Gasfeder GF8/19 für Traktorkabinen – Ersatz für die Gasfeder an Heckscheibe. Made in Germany, einbaufertig mit Anschlussteilen.

PRESKO Telescopic cylinder 753700, single-acting, 3-stage, 700 mm stroke, 3 t

CODE:

280021

Availability: 35 item(s)

This product cannot be added to the
cart because you are not logged in.

Underfloor telescopic cylinder PRESKO 753700 with three chrome-plated, weather-resistant stages. Tipping capacity 3 t, max. operating pressure 180 bar, stroke 700 mm, first stage Ø 75 mm, oil requirement 2,1 l, outer diameter 85 mm, retracted installation length 396 mm, pin spacing 118 mm. For small tippers up to 3,5 t GVW, agricultural trailers, car tipper trailers, roll-off containers and transhipment platforms.

Brand

PRESKO

Gasfeder GF8/19, 491 mm, 200 mm Hub, 200 N – passend für Case IH, Dieteg, John Deere u. a.

CODE:

277224

This product cannot be added to the
cart because you are not logged in.

Gasfeder GF8/19 für Traktorkabinen – Ersatz für die Gasfeder an Frontscheibe oder Heckscheibe. Made in Germany, einbaufertig mit Anschlussteilen.

PRESKO Telescopic cylinder 9041050, single-acting, 4-stage, 1050 mm stroke, 5 t

CODE:

280022

Availability: 22 item(s)

This product cannot be added to the
cart because you are not logged in.

Hydraulic telescopic cylinder PRESKO, 4-stage, each stage chrome-plated. Suitable for installation in small tippers (3,5 t GVW), agricultural trailers and car tipper trailers. Weather-resistant chrome-plated stages. Applications: 3,5 t tipper lorries, agricultural trailers, unloading boxes, transhipment platforms.

Brand

PRESKO

PRESKO Control unit (wired remote control) for hydraulic power packs, 12/24 V, 2 buttons, 4-pin plug, magnets

CODE:

280016

Availability: 28 item(s)

This product cannot be added to the
cart because you are not logged in.

Wired remote control for hydraulic power packs with 12 or 24 V supply. Robust design with holding pouch; strong magnets on the back for attaching to metal parts. Scope of delivery: remote control with holding pouch and cable with 4-pin plug. Applications: power packs in tippers, lifting platforms, tail lifts, car trailers, presses and lifting equipment.

Brand

PRESKO

PRESKO hydraulic power pack, 13 l, 24 V, 3,0 kW, single-acting, 180 bar

CODE:

280036

Availability: 16 item(s)

This product cannot be added to the
cart because you are not logged in.

Hydraulic power pack (Power Pack) for 24 V on-board electrical system with 13 l plastic tank and 3,0 kW motor, for tippers and tipping trailers. Supplied with bracket, cable remote control (4 m, with plug) and plastic motor cover. Ready for operation after battery connection and oil filling. Thermal protection against motor overheating; continuous operation 2–3 min. Application: tippers up to 3,5 t GVW, lifting platforms, tail lifts, trailers, agricultural machinery, lifting equipment – systems with single-acting cylinder.

Brand

PRESKO

Gasfeder GF8/19, 586 mm, 200 mm Hub, 150 N – passend für Fiat, Massey Ferguson, New Holland u. a.

CODE:

277252

This product cannot be added to the
cart because you are not logged in.

Gasfeder GF8/19 für Traktorkabinen – Ersatz für die Gasfeder an Frontscheibe oder Heckscheibe. Made in Germany, einbaufertig mit Anschlussteilen.

PRESKO Hydraulic power pack, 11 l, 12 V, 2,0 kW, single-acting, 180 bar

CODE:

280012

Availability: 1241 item(s)

This product cannot be added to the
cart because you are not logged in.

Hydraulic power pack for 12 V vehicle electrical systems with 11 l plastic tank. Supplied with mounting bracket, wired remote control (4 m, with plug) and plastic motor cover; hydraulic diagram on the tank and connection instructions are included. Ready for operation after connecting the battery and filling with oil. Thermal protection; continuous operation 2–3 min. Applications: tippers up to 3,5 t GVW, lifting platforms, tail lifts, car trailers, agricultural machinery, lifting equipment – systems with a single-acting cylinder.

Brand

PRESKO

Gasfeder GF8/19, 500 mm, 205 mm Hub, 130 N – passend für Case IH, John Deere

CODE:

277201

This product cannot be added to the
cart because you are not logged in.

Gasfeder GF8/19 für Traktorkabinen – Ersatz für die Gasfeder an Heckscheibe oder Tür. Made in Germany, einbaufertig mit Anschlussteilen.

Gasfeder GF8/19, 500 mm, 212 mm Hub, 180 N – passend für Case IH, Deutz-Fahr, Fritzmeier u. a.

CODE:

277202

This product cannot be added to the
cart because you are not logged in.

Gasfeder GF8/19 für Traktorkabinen – Ersatz für die Gasfeder an Frontscheibe, Heckscheibe oder Tür. Made in Germany, einbaufertig mit Anschlussteilen.

Show other 12 products

422 - 436 Prev

430 431 432 433 434 435 436 437 438 439 440 441 442 443 444