Vendor productsProducts found: 5322

71625/50
Out of stock. If required, please enquire at mail@trailer.one.
Double-acting micro cylinder from the stronger 71625 series: 25 mm piston, 16 mm piston rod, 50 mm stroke.
Brand
CHAPEL
Stroke (mm)
50
BL38SCB60-210B
Out of stock. If required, please enquire at mail@trailer.one.
Counterbalance valve in block, single version -210B, 3/8 inch, 210 bar, 60 l/min.
BL38SCB60-350
Out of stock. If required, please enquire at mail@trailer.one.
Single counterbalance valve for 350 bar, 3/8 inch, 60 l/min, adjustment 165 bar per turn.
2697
Availability: 9 item(s)
Please sign in to buy

This product cannot be added to the
cart because you are not logged in.

For mounting on round drawbar tubes of unbraked trailers; nose load 100 kg, galvanised steel housing.
Brand
WINTERHOFF
Diameter (mm)
70
880034
Availability: 568 item(s)
Please sign in to buy

This product cannot be added to the
cart because you are not logged in.

Automatisch klappbares Stützrad mit Führungsrohr Ø 60 mm, Vollgummirad 200 x 60 mm, Bauhöhe 545 mm und Stützlast 250 kg; Nachbau, passend als Ersatz für das WINTERHOFF Stützrad 1860664. Alternative zu Artikel Artikel 40138 (WINTERHOFF 1860664). Vergleichsnummer: 1860664; Händlernummer: 11000730
Brand
Aftermarket product
Extension length (mm)
285
JPROB
Out of stock. If required, please enquire at mail@trailer.one.
Lowering valve for single-acting CHAPEL hand pumps, used to lower the cylinder again. Dealer part nos.: 765902, 11002930
JP20D
Out of stock. If required, please enquire at mail@trailer.one.
CHAPEL seal kit JP20D, intended for the P20D1 hand pump.
CHC24VSPULE
Out of stock. If required, please enquire at mail@trailer.one.
Solenoid coil for 24 V DC, to fit the electric release valve of the CHC24V power packs.
Brand
CHAPEL
Voltage (V)
24
J63
Out of stock. If required, please enquire at mail@trailer.one.
Replacement seals for overhauling the CHAPEL 645 cylinder; the adjacent sizes 640 and 650 require J62 and J64 respectively.
KITFPRP-4L
Out of stock. If required, please enquire at mail@trailer.one.
Fitting kit with 4.5-litre plastic tank, Ø 196 x 199 mm, 1.19 kg complete.
297
Out of stock. If required, please enquire at mail@trailer.one.
700 mm stroke, two-stage, with 26 mm head mount and 449 mm installed length.
Brand
CHAPEL
Stroke (mm)
700
316
Out of stock. If required, please enquire at mail@trailer.one.
1710 mm stroke from three stages of 88, 107 and 126 mm, 45 mm head mount, without ball socket.
Brand
CHAPEL
Stroke (mm)
1710
Show other 12 products
TrailerOne GmbH

About vendor

Ask a question
Vendor filters
Automatic unwinding
Bell outer dimension (mm)
Cable diameter (mm)
–
  • 3
  • 8
Clear height (mm)
–
  • 15
  • 230
Clear width (mm)
–
  • 15
  • 122
Colour
Compact bearing
Extension length (mm)
–
  • 180
  • 520
Gas spring
Height (mm)
–
  • 1
  • 700
Hole spacing (mm)
–
  • 12
  • 490
Hole(s) (mm)
–
  • 3
  • 100
Inner cable length (mm)
–
  • 546
  • 15000
Inner diameter (mm)
–
  • 3
  • 90
Lashing capacity (daN)
–
  • 240
  • 1600
Length (mm)
–
  • 9
  • 12000
Load capacity
Show all (15)
Load-holding brake
Lock
Maximum permissible gross weight (kg)
Show all (18)
Nose weight (kg)
Show all (19)
Number of folds
Number of poles
Show all (12)
Number plate light
Offset (ET)
Outer diameter (mm)
–
  • 10
  • 140
Overall length (mm)
–
  • 36
  • 12000
Pitch circle diameter (PCD)
Pulling load (kg)
–
  • 450
  • 1150
Rear fog light
Reversing light
Rim diameter (inches)
SCM certified
Sleeve length (mm)
–
  • 350
  • 3062
Spanner size
–
  • 7
  • 50
Square (mm)
–
  • 45
  • 100
Strap length (m)
Strap width (mm)
Tyre aspect ratio
Tyre width
Width (mm)
–
  • 3.9
  • 3500
Wheel diameter (mm)
–
  • 200
  • 666
Ø piston rod/cylinder (mm)
Extended length (mm)
–
  • 130
  • 2335
Stroke (mm)
Show all (95)
Thread
Show all (32)
Extension force (N)
Show all (31)
End fitting
Tube diameter (mm)
Flange
Fits
Brake size (mm)
Show all (19)
Brand