Vendor productsProducts found: 5322

Shaft seal, Ø 42/64 x 10 mm, for AVONRIDE

CODE:

670013

Availability: 38 item(s)

This product cannot be added to the
cart because you are not logged in.

Hub seal for British AVONRIDE axles in an intermediate size; a 42/65 seal from the BRADLEY range is not a substitute despite a difference of only 1 mm.

Brand

Aftermarket product

AL-KO bush, for 251/252/351/352 VB

CODE:

65739

Availability: 2 item(s)

This product cannot be added to the
cart because you are not logged in.

Flat bush part with 35 mm outside dimension and 7 mm height for the AL-KO series 251/252 VB and 351/352 VB. Manufacturer part no.: 372771; Dealer part nos.: 10018481, 510366

AL-KO bearing cartridge, Ø 70/50 x 242 mm, casting number 690536, metal, for 251VB-2 Optima

CODE:

1361196

Availability: 1 item(s)

This product cannot be added to the
cart because you are not logged in.

Bearing cartridge for the AL-KO 251 VB-2 Optima, inside dimension 50 mm, 242 mm long, casting number 690536. Dealer part no.: 501673

AL-KO spacer bracket, Ø 50 to 40 mm, for couplings

CODE:

63916

Availability: 20 item(s)

This product cannot be added to the
cart because you are not logged in.

AL-KO spacer bracket that reduces a coupling mount from Ø 50 mm to 40 mm. Manufacturer part no.: 372937; Dealer part nos.: 10019697, 510209

High-visibility vest, orange

CODE:

60340

Availability: 586 item(s)

This product cannot be added to the
cart because you are not logged in.

Equipment for breakdowns and for work on the load or coupling at the roadside; weight 110 g.

Compensating bar, bore Ø 12/12/12 mm

CODE:

141610

Availability: 65 item(s)

This product cannot be added to the
cart because you are not logged in.

Distributes the braking force in the linkage, for linkages with 12 mm pins throughout; bars with 8 or 10 mm bores are not a replacement. Weight 0.23 kg.

CHAPEL telescopic cylinder 202, single-acting, 2-stage, 795 mm stroke

CODE:

202

Out of stock. If required, please enquire at mail@trailer.one.

Tipper cylinder 202, two-stage with 795 mm stroke and 26 mm head mount, without ball socket.

Brand

CHAPEL

Stroke (mm)

795

Plug-in axle, Ø 20 x 87 mm, with split pin, galvanised steel

CODE:

2707

Availability: 2 item(s)

This product cannot be added to the
cart because you are not logged in.

For detachable connection of components with a bore for Ø 20 mm, e.g. on straps or joints; the supplied split pin secures the axle against slipping out.

Brand

Own brand

Diameter (mm)

Hand crank, 660 mm, across flats 19, offset 140 mm, for prop stands/corner steadies, galvanised steel

CODE:

2721

Availability: 9 item(s)

This product cannot be added to the
cart because you are not logged in.

For winding prop stands and swivel supports in and out with 19 mm hex socket; the offset forms the lever arm when cranking.

Brand

Own brand

Material

Steel

Automatic lashing strap, 50 mm x 3 m, LC 750 daN, 1-piece, with automatic roll-up/unroll, ratchet, pointed hook

CODE:

2729

Availability: 12 item(s)

This product cannot be added to the
cart because you are not logged in.

For securing larger loads: the wide strap winds in and out automatically and is tensioned with the ratchet; in loop configuration U 1500 daN, hooked in via pointed hooks.

Brand

Own brand

Width (mm)