Vendor productsProducts found: 5322

CODE:

60138

Availability: 16 item(s)

This product cannot be added to the
cart because you are not logged in.

Seals the wheel hub or axle: keeps dirt and water away from the bearing and the lubricant inside the bearing. Cross-reference no.: 401111001; Dealer part nos.: 10029042, 620229

Brand

KNOTT

Inner diameter (mm)

Plug, 7-pin, with screw terminal, plastic

CODE:

10100

Availability: 2370 item(s)

This product cannot be added to the
cart because you are not logged in.

Trailer-side plug for the towing vehicle's 7-pin socket; transmits indicators, brake and tail light, wires are connected via screw terminals. Dealer part nos.: 700000, 10034056

Connection

Screw connection

Material

Plastic

SCHLEGL braked axle SB9, 900 kg, wheel brake 520, AM: 1600 mm, FM: 2050 mm, square 64 mm, wheel fixing 112/5

CODE:

11056

Out of stock. If required, please enquire at mail@trailer.one.

Braked axle with wheel brake 520 for new builds or replacement on trailers up to 900 kg gross weight; mounting width 1600 mm, flange width 2050 mm, pitch circle 112/5. Manufacturer part no.: 102331; Dealer part no.: 752156

Brand

SCHLEGL

Customs cable, Ø 8 mm, with wire core, 1 m

CODE:

20296

Out of stock. If required, please enquire at mail@trailer.one.

For sealing transport units, containers and lorries; the wire core makes the rope tear-resistant and shows if it has been cut. Dealer part no.: 763363

Diameter (mm)

SCHLEGL drawbar FS10, 1000 kg, cranked, Ø 70 x 3000 mm, with protective bar

CODE:

11017

Out of stock. If required, please enquire at mail@trailer.one.

Cranked drawbar for trailers up to 1000 kg, the crank creates ground clearance or adapts the height to the frame design; with protective bar. Manufacturer part no.: 100178; Dealer part no.: 752508

Brand

SCHLEGL

STABILUS overrun damper, for HAHN AB 13/13.3 K, ABR 13/13.3 K, ABR 13.3 K BAN, ABW 13 K, 370 mm

CODE:

60351

Availability: 14 item(s)

This product cannot be added to the
cart because you are not logged in.

Damps the movement of the overrun coupling when the trailer brakes; housing with 12 mm eye, rod with M8 thread, retracted 245 mm, up to 1400 kg. Dealer part no.: 027361

Brand

STABILUS

Extended length (mm)

370

Angle lever lock, right, size 0 lever length 144 mm, galvanised steel

CODE:

20052

Out of stock. If required, please enquire at mail@trailer.one.

Lever fastener for locking flaps, side boards or boxes, right-hand fitting, without safety catch; hole spacing 38 mm, bores Ø 6 mm. Cross-reference no.: 403855001; Dealer part no.: 765408

Hole spacing (mm)

Hole(s) (mm)

JOKON 630 rear lamp, right

CODE:

10722

Out of stock. If required, please enquire at mail@trailer.one.

Rear light for the right-hand side of trailers and commercial vehicles, e.g. as a replacement for a faulty light. Manufacturer part no.: 102080020; Dealer part no.: 701038

Brand

JOKON

Installation position

Right

Eye M10, bore Ø 10.1 mm, effective length 16 mm bore width 12 mm, galvanised steel

CODE:

230040

Availability: 374 item(s)

This product cannot be added to the
cart because you are not logged in.

Short connection eye with M10 thread and 16 mm effective length for gas springs and linkages; bore Ø 10.1 mm for pins with Ø 10 mm. Dealer part no.: 701865

EAN

4054354121665

Effective length (mm)

Ball socket M8, Ø 13 mm, effective length 22 mm with safety clip, galvanised steel

CODE:

232011

Out of stock. If required, please enquire at mail@trailer.one.

Counterpart to the ball stud for ball Ø 13 mm, connected to the gas spring or linkage via M8 thread. The retaining clip holds the socket on the ball. Dealer part no.: 721770

Diameter (mm)

EAN

4054354121740

Brake shoe set, 250 x 40 mm, for NIEPER wheel brake GU 250 x 40 RA

CODE:

604920

Availability: 5 item(s)

This product cannot be added to the
cart because you are not logged in.

Replacement brake shoes for the NIEPER drum brake GU 250 x 40 RA, for replacing worn linings; drum inner diameter 250 mm. Dealer part no.: 780083

Brake drum diameter (mm)

250

Brand

Aftermarket product

Bearing bolt, Ø 8 x 38 mm, galvanised steel

CODE:

234012

Out of stock. If required, please enquire at mail@trailer.one.

Pin for the pivoting mounting of eyes, fork heads or fittings, e.g. when connecting gas springs; version 38 mm long, galvanised against corrosion. Dealer part no.: 721851

EAN

4054354122587

Material

Galvanised steel

Show other 12 products

149 - 163 Prev

157 158 159 160 161 162 163 164 165 166 167 168 169 170 171

Next 165 - 179