Deep groove ball bearing 6204-2RS, Ø 20/47 x 14 mm
Deep groove ball bearings with rubber seals on both sides (2RS) for wheel bearings, shafts and rollers. The seals keep dirt and moisture away from the raceways and the grease inside the bearing; no relubrication is required.
The bearing designation defines the bore, outside diameter and width; when replacing, read the designation on the outer ring of the old part. A suffix such as C3 indicates increased internal clearance and must be compared with the old part when replacing. When pressing in, apply force only via the ring being pressed in.
No reviews found
