A platform by TrailerOne GmbH – for trade customers only! All prices are net, plus freight and statutory VAT.

Version 2.2

+49 5402 96526-10

Striker plates

Home/Latches and hinges/Striker plates

KNOTT keeper, 30 x 55.5 x 30 mm, Ø 14 mm hole spacing 36 mm, bores Ø 6.5 mm, for 20513

CODE:

20526

Counterpart to the 20513 spring bolt fastener, takes its locking pin in the Ø 14 mm receiver; bolted on via bores Ø 6.5 mm with 36 mm hole spacing. Manufacturer part no.: 404268001; Dealer part no.: 700447

Brand

KNOTT

Hole spacing (mm)

Availability: 73 item(s)

This product cannot be added to the
cart because you are not logged in.

KNOTT keeper, for long-travel lock for screw mounting, galvanised steel

CODE:

20598

Counterpart to the long-travel fastener on side boards of trailers and commercial vehicles, bolted on. Manufacturer part no.: 406387001; Dealer part no.: 601534

Brand

KNOTT

Material

Galvanised steel

Out of stock. If required, please enquire at mail@trailer.one.

HESTAL keeper 60455, straight, 18 x 84 mm for eccentric lock 20156/201560, galvanised

CODE:

20157

This HESTAL 60455 keeper is of straight design and measures 18 x 84 mm. It is specifically designed for use with the HESTAL 20156 and 201560 eccentric fasteners and has a galvanised surface for improved corrosion protection. Manufacturer part no.: 6.030.052.00; Cross-reference no.: 402108.001; Dealer part no.: 700438

Brand

HESTAL

Length (mm)

Availability: 105 item(s)

This product cannot be added to the
cart because you are not logged in.

Keeper, 25 x 84 x 59 mm, hole spacing 16 mm bores Ø 5 mm, for edging dropside lock

CODE:

20167

Bolted on opposite the inset side board fastener and receives its latch; galvanised steel for trailer side boards, platforms and bodies. Dealer part no.: 765195

Hole spacing (mm)

Hole(s) (mm)

Availability: 3 item(s)

This product cannot be added to the
cart because you are not logged in.

KARTT keeper, 30 x 89 x 18.5 mm, straight

CODE:

20528

Counterpart to side board fastener 20511, which the fastener bow engages in; fixed via Ø 5 mm bores at 22 mm hole spacing, galvanised steel. Manufacturer part no.: TKLP1501; Dealer part no.: 11007464

Brand

KARTT

Hole spacing (mm)

Availability: 1502 item(s)

This product cannot be added to the
cart because you are not logged in.

KARTT keeper, 30 x 126 x 20 mm, cranked

CODE:

20521

Counterpart to the side board fastener 20502, into which the fastener hooks; cranked for an offset mounting position, bores Ø 5 mm at 47 mm spacing, galvanised. Dealer part no.: 10037876

Brand

KARTT

Hole spacing (mm)

Availability: 1306 item(s)

This product cannot be added to the
cart because you are not logged in.

Keeper (Z-09A), 99 x 25 x 23 mm hole spacing 80 mm, bores Ø 8.5 mm

CODE:

20536

Counter plate for eccentric fasteners on car trailers and vehicle bodies, which the fastener engages when closing; made of galvanised steel. Dealer part no.: 11003775

Hole spacing (mm)

Hole(s) (mm)

Availability: 5161 item(s)

This product cannot be added to the
cart because you are not logged in.

SPP keeper Z-05, 21 x 142 x 20 mm, straight hole spacing 47 mm, bores Ø 5 mm

CODE:

20531

Counterpart for eccentric and over-centre fasteners on side boards of car trailers, engaged by the fastener when locking; straight version made of galvanised steel.

Brand

SPP

Hole spacing (mm)